A mobile fixture system for friction stir welding application
DOI:
https://doi.org/10.14232/analecta.2022.1.97-109Keywords:
Friction stir welding, mobile fixture, weldments, mechanical design, control systemAbstract
In an attempt to provide a more flexible means of achieving friction stir welding (FSW) of Aluminum without the use of expensive FSW machine tool, which are not readily available, this study developed a mobile fixture system (MFS) for FSW on Vertical milling Machine Tool (VMMT) and Pillar drilling machine Tool (PDMT). A conceptual design of the fixture system with a moving work table, which provides for transverse feed (movement) of the workpieces during FSW, was generated. The detailed design of the components of the MFS was done using existing mechanical design formulae. Subsequently, the design was fabricated and evaluated. An ATmega 328P Arduino Uno microcontroller was used to design a control system to automate the MFS worktable movement. Results revealed that the MFS worked smoothly during FSW of AA 1100 materials. The MFS performed well during the FSW of the Aluminum materials on the VMMT as well as the PDMT. The efficiency of its motion accuracy was estimated as 87.2%. Also, the trend of the tensile strength and the hardness value as well as the joint efficiencies of the AA 1100 weldments produced using the developed MFS agreed with existing studies.
Downloads
References
Ogedengbe T. I., Abioye T. E. and Ekpemogu I., Investigation of Mechanical Properties and Parametric Optimization of the Dissimilar GTAW of AISI304 Stainless Steel and Low Carbon Steel. World Journal of Engineering, 15(5) (2018), pp. 584-591.
Abioye T.E., Ariwoola O.E., Ogedengbe T.I., Farayibi P.K., Gbadeyan O.O., Effects of Welding Speed on the Microstructure and Corrosion Behavior of Dissimilar Gas Metal Arc Weld Joints of AISI 304 Stainless Steel and Low Carbon Steel, Materials Today Proceedings, 17 (2019), pp. 871-877.
Asmare A., Al-Sabur R. and Messele E., Experimental Investigation of Friction Stir Welding on 6061-T6 Aluminum Alloy using Taguchi-Based GRA. (2020), pp. 1-21 https://doi.org/10.3390/met10111480.
Rasheed A. A., Development of a FSW Fixture for Joining Materials on a Vertical Milling Machine. Masters Thesis, Federal University of Technology, Akure, Nigeria, (2020), pp. 150.
Alali S. and Injeti N. K., An Innovative Fixture Design in making use of a Milling Machine to Perform the Function of Friction Stir Welding and Eliminate the Exit Hole. International Journal of Innovative Research in Science, Engineering and Technology, 5(4) (2016), pp. 5717 – 5723.
Jadhav G. C. and Dalu R. S., Design and Development of a Fixture for Friction Stir Welding. International Journal of Mechanical Engineering and Technology (IJMET), 8(9) (2017), pp. 132–139.
Shahabuddin, Dwivedi V.K, Fabrication and Design of Fixture with a New Technique for Friction Stir Welding, International Journal of Engineering Technology Science and Research IJETSR, 5(1) 2018, pp. 1540-1544.
Hasan M. M., Ishak M. and Rejab M. R., A simplified design of clamping system and fixtures for friction stir welding of aluminum alloys. Journal of Mechanical Engineering and Sciences (JMES), 9 (2015), pp. 1628-1639.
Baghel P. K., Siddique A. N., Design and development of Fixture for Friction Stir Welding Innovative Systems. Design and Engineering, 3(12) (2012), pp. 40-47.
Kamblea L.V., Soman S.N., Brahmankar P.K., Understanding the Fixture Design for Friction stir Welding Research Experiments. Material Today: Proceeding 4. 5th International Conference of Materials Processing and Characterization (ICMPC), (2016), pp. 1277 – 1284.
Sreenivas P, Anil Kumar R, Sreejith P. S, Effect of Applied Axial Force on FSW Of AA 6082 - T6 Aluminium Alloys International Journal of Mechanical Engineering and Technology (IJMET) 8(1) 2017, pp. 88–99.
Kaustubh K. A. and Akshaykumar P. K. (2016): Design and Development of Milling Fixture. International Journal for Research in Engineering Application & Management (IJREAM) Vol-02, Issue 02; Pp 1-3, May 2016.
Ramnath B. Vijaya, Elanchezhian C., Rajesh S., Prakash S. Jaya, Kumaar B. Manoj, Rajeshkannan K., Design and Development of Milling Fixture for Friction Stir Welding. Materials Today: Proceedings 5 (2018) 1832–1838
Awang M. A, Khan S. R., Ghazanfar B., and Latif F. A., Design, Fabrication and Testing of Fixture for Implementation of a New Approach to Incorporate Tool tilting in Friction Stir Welding, 13 annual MTEC Web conference of EDP Science, 2014, pp. 1-6.
Gra¨tzel , Hasieber M., Lo¨hn T. and Bergmann JP., Reduction of friction stir welding setup loadability, process forces and weld seam width by tool scaling M Materials: Design and Applications 0(0) 2020, pp. 1–10, https://doi.org/10.1177/1464420720903331
Singh R., Rizvi S. A. and Tewari S.P Design and Fabrication of Friction Stir Welding Fixture with a New Approach. (Elixir International Journal). (2015), pp. 34844-34846.
Bhavsar K. and Acharya G.D., Design and development of simplified fixture for FSW. International Journal of Creative Research Thoughts (IJCRT), 5(3) (2017).
Akshansh M., Designing and Fabrication of Fixture for Friction Stir Welding of Aluminium AA6061 Alloys IJSRD - International Journal for Scientific Research & Development, 5(5) (2017).
Pushp K. B. and Arshad N. S., Design and Development of Fixture for Friction Stir Welding, Innovative Systems Design and Engineering, 3(12) (2012), pp. 40 – 47.
Elyasi M., Derazkola H. A., Hosseinzadeh M., Investigations of tool tilt angle on properties friction stir welding of A441 AISI to AA1100 aluminium 230(7), (2016) pp. 1234-1241
Zuluaga-Posada, M., Hoyos, E. and Montoya, Y., Performance evaluation of a novel force measuring device for Friction Stir Welding (FSW) of aluminum alloys. DYNA, 86(210), pp. 150-155, July - September, 2019.
Kavitha M., Manickavasagam V. M., Sathish T., Bhiksha Gugulothu , Sathish Kumar A., Karthikeyan S. and Subbiah R., , Parameters Optimization of Dissimilar Friction Stir Welding for AA7079 and AA8050 through RSM, Hindawi Advances in Materials Science and Engineering Volume (2021), pp. 1-8. https://doi.org/10.1155/2021/9723699
Fratini L., Micari F., Buffa G., Ruisi V.F. (2010): A new fixture for FSW processes of titanium alloys. CIRP Annals – Manufacturing Technology. (59) (2010), pp. 271-274. https://doi.org/10.1016/j.cirp.2010.03.003
Ogedengbe T. I., and Abadariki S. O., Development and Performance Evaluation of a Bone Milling Cum Pulverizing Machine. West Indian Journal of Engineering (WIJE), 37(1) (2014), pp. 23-28.
Ogedengbe T. I., Development and Performance Evaluation of a Liquid Soap Production Machine for the Local Soap Industry in Nigeria, Journal of Applied Science and Environmental Management, 23(6) (2019), pp. 1119 -1125.
Khurmi R.and Gupta J., Machine Design. Eurasia Publishing House (PVT.) LTD. New Delhi. 2005.
Ogedengbe T.I and Aderoba A. A., Computer-Aided Selection of Rolling Contact Bearings. Modelling, measurement. Peer Reviewed/International Journal, 74(5) (2005), pp. 1-18.
Goyal A. and Garg R. K., Effect of Tool Rotational and Transverse Speed on Mechanical Properties of Friction Stir Welded AA5086-H32 Aluminium Alloy, Int. J. Microstructure and Materials Properties, 12(1/2) (2017), pp. 79-93.
Sevvel Pa ,Jaiganesh Vb Effects of axial force on the mechanical properties of AZ80A Mg alloy during friction stir welding, 5th International Conference of Materials Processing and Characterization (ICMPC 2016), Materials Today: Proceedings 4 (2017), pp.1312–1320
Memon, S.; Murillo-Marrodán, A.; Lankarani, H.M.; Aghajani Derazkola, H. Analysis of Friction Stir Welding Tool Offset on the Bonding and Properties of Al–Mg–Si Alloy T-Joints. Materials 2021, 14, 3604. https://doi.org/ 10.3390/ma14133604
Abioye T. E., Zuhailawati H., Anasyida A. S., Yahaya S. A. and Dhindaw B. K., Investigation of the Microstructure, Mechanical and Wear Properties of AA6061-T6 Friction Stir Weldments with Different Particulate Reinforcements Addition. Journal of Materials Research and Technology, (2019), pp. 1-12.
Singh B., Singhal P. and Saxena K.K., Effect of transverse speed on mechanical and microstructural properties of friction stir welded aluminium AA2024-T351, Advances in Materials and Processing Technologies, (2020), pp. 1-11.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (C) 2024 Authors
This work is licensed under a Creative Commons Attribution 4.0 International License.
